A Diamond Wire Saw machine only needs a long wire to cut stones in various sizes, including all types of stone materials such as marble, granite, and basalt. Some people may wonder, will it be dangerous if the wire breaks?

Hello, everyone. I'm Oliver Mo, engaged in the production and sales of wire saws. Actually, the wire saw machines produced by our factory are equipped with a wire break protection function. After turning on the machine, on its operation interface, you can see parameters like the current main - engine current, the set current, and the main - engine rotation speed. Then, press the down - page button on the screen to go to the second page, and press it again to reach the third page. At this point, in the manufacturer's settings, you'll find an automatic wire retraction function switch, which is off, and a wire break protection switch, also off. You can turn on the wire break protection function switch. Press 6 as prompted, and then the wire break protection function is activated. So, how does it work? If the wire breaks, the rotating driving wheel will stop, thus providing protection. This function is turned off by default when the machine leaves the factory. Even some experienced workers, who are aware of this function, still prefer to keep it off. Why is that? Because if you turn on this function, when the machine is not in operation and you need to debug it, you won't be able to start the machine. That is, the driving wheel won't rotate. Only when it is under stress, that is, when the wire is installed, can you start the machine and make it run. Therefore, you can turn on this function according to your own needs during cutting. When the machine is not in use and you need to perform maintenance and debugging, remember to turn off this function before starting the work. Did I make it clear?

Finally, I'm Oliver Mo, involved in the production and sales of wire saws. I hope to be your partner in the stone - quarrying business. If you encounter any problems when purchasing a wire saw, feel free to contact me privately. See you in the next video.