This is a heart - wrenching scene I saw at a quarry. Wire saw machines were casually discarded in the wilderness, exposed to the sun and rain. Many of them were already rusty, and weeds had grown inside the machines. According to an insider, these machines were in good condition and could operate normally before being dumped here. As a producer and seller of wire saws, I think it's necessary to record a video to talk about the proper storage of wire saw machines.

Hello, everyone. I'm Oliver Mo, who manufactures and sells wire saws. Here are some suggestions for storing wire saw machines:

A wire saw machine is an important stone - cutting device. Proper storage is crucial for maintaining its performance and extending its service life. Here are some suggestions for storing wire saw machines:

1. Cleaning and Drying: Before storing the wire saw machine, make sure to clean it thoroughly. Use a high - pressure water gun to spray the machine body and the rail to remove dirt, debris, and impurities left during the cutting process. After cleaning, place the wire saw machine in a well - ventilated area to air - dry naturally, ensuring that there is no moisture left on the machine body to prevent metal parts from rusting due to dampness.

2. Lubrication and Maintenance: Fully lubricate the moving parts of the wire saw machine, such as the rollers in the middle of the rail and the bolts. For the hydraulic system, check if the oil level is normal. If necessary, replenish or replace the hydraulic oil.

3. Regular Maintenance: Start the machine and let it run for at least 15 minutes every month. Check if the insulation layer of the cable is cracked every quarter.

4. Storage Environment: Choose a dry, cool, and well - ventilated indoor environment to store the wire saw machine, avoiding direct sunlight and a humid environment. Drastic changes in temperature and humidity may cause deformation, aging, or rusting of the equipment parts. If indoor storage is not possible, build a rain - shelter and cover the wire saw machine tightly with a waterproof cloth. Also, make sure the machine is placed on the rail to avoid direct contact with the ground and prevent water from corroding the machine.

5. Component Inspection and Maintenance: Before storage, conduct a detailed inspection of each component of the wire saw machine. Check if there is any wear, breakage, or deformation. If problems are found, replace the components in time. Check the rotation flexibility and wear of the guide wheels. If necessary, replace the rubber rings of the guide wheels with severe wear to ensure the normal operation of the equipment when it is used again.

6. Protection of the Electrical System: The electrical system of the wire saw machine is relatively delicate. When storing it, prevent it from getting damp or being affected by electrical interference. Pull out the power plug and wrap the plug and the socket part of the machine body with insulating tape to prevent dust and moisture from entering.

7. Safety Protection: Store the wire saw machine in a safe area, out of the reach of children and irrelevant people. Make sure the equipment is in a locked state to prevent accidental startup and safety accidents.

Following these suggestions can keep the wire saw machine in good condition during storage, reduce the occurrence of faults, and provide a reliable guarantee for the next use.

Finally, I'm Oliver Mo, who manufactures and sells wire saws. I hope to be your partner on the stone - quarrying journey. If you encounter any problems when buying a wire saw, you can contact me privately. See you in the next video.